PowerTIG 250EX Cooler and Cart Bundle Package
Product Overview
SKU# PT-250EX-BNDL-1
This Bundle package includes the PowerTIG 250EX, all of the standard accessories for the PowerTIG 250EX, PowerCool 401 water-cooler and the PowerCart 375LF. The PowerTIG 250EX and PowerCool 401 Water Cooler pair seemlessly together as an integrated system.
The PowerTIG 250EX stacks securely on top of the PowerCool 401 using a system of slide-on interlocking tabs. For a more permanent installation, the two units can also be fastened together using the side-panel screws and bracket, keeping them firmly connected during use and transport.
The 240V PowerCool 401 plugs directly into a dedicated power outlet on the rear of the PowerTIG 250EX, providing a clean and convenient installation without the need for a separate 240V wall outlet.
The PowerCart 375LF is tailored specifically to the frame of the cooler and welder package. It fits neatly without being undersized. A full size cylinder can be loaded as well. When the cart needs to resist rolling, two heavy duty locking casters lock the wheels on the front. The large 10" rear wheels also provide easy rolling on shop floors.
Generator Requirements and Important Product Notes
Generator Requirements:
5% or less Total Harmonic Distortion
10,500 Watts Surge Rating
General Use and Specifications
| Open Circuit Voltage (OCV) | 85V
|
| Voltage/Phase | 240V 1 Phase
240V 3 Phase
|
| TIG Max Inrush Amps (I1Max) | 240V 1 Phase: 40 A
240V 3 Phase: 21 A
|
| TIG Rated Effective Amps (I1Eff) | 240V 1 Phase: 32 A
240V 3 Phase: 16 A
|
| TIG DUTY CYCLE 240V 1 Phase | 240V 1 Phase: 60% Duty Cycle @ 40°C at 250A/20V Rated Output
240V 1 Phase: 100% Duty Cycle @ 40°C at 200A/18V Rated Output
|
| TIG OUTPUT RANGE 240V 1 Phase | 240V 1 Phase TIG Amp AC Output Range: 5 to 250 Amps
240V 1 Phase TIG Volt AC Output Range: 10.2 to 18 Volts
240V 1 Phase TIG Amp DC Output Range: 5 to 250 Amps
240V 1 Phase TIG Volt DC Output Range: 10.2 to 18 Volts
|
| TIG DUTY CYCLE 240V 3 Phase | 240V 3 Phase: 60% Duty Cycle @ 40°C at 250A/20V Rated Output
240V 3 Phase: 100% Duty Cycle @ 40°C at 250A/18V Rated Output
|
| TIG OUTPUT RANGE 240V 3 Phase | 240V 3 Phase TIG Amp AC Output Range: 5 to 250 Amps
240V 3 Phase TIG Volt AC Output Range: 10.2 to 18 Volts
240V 3 Phase TIG Amp DC Output Range: 5 to 250 Amps
240V 3 Phase TIG Volt DC Output Range: 10.2 to 18 Volts
|
| Stick DUTY CYCLE 240V 1 Phase | 240V 1 Phase: 35% Duty Cycle @ 40°C at 200A/28V Rated Output
240V 1 Phase: 60% Duty Cycle @ 40°C at 160A/26.5V Rated Output
240V 1 Phase: 100% Duty Cycle @ 40°C at 130A/25.2V Rated Output
|
| Stick OUTPUT RANGE 240V 1 Phase | 240V 1 Phase Stick Amp DC Output Range: 5 to 200 Amps
240V 1 Phase Stick Volt DC Output Range: 20.2 to 28 Volts
|
| Stick DUTY CYCLE 240V 3 Phase | 240V 3 Phase: 35% Duty Cycle @ 40°C at 200A/28V Rated Output
240V 3 Phase: 60% Duty Cycle @ 40°C at 160A/26.5V Rated Output
240V 3 Phase: 100% Duty Cycle @ 40°C at 130A/25.2V Rated Output
|
| Stick OUTPUT RANGE 240V 3 Phase | 240V 3 Phase Stick Amp DC Output Range: 5 to 200 Amps
240V 3 Phase Stick Volt DC Output Range: 20.2 to 28 Volts
|
| TIG Start Type | Lift Start With Remote
HV/HF Solid State (Touchless) Start
|
| Start Amp Range AC | 5-250A
|
| Start Amp Range DC | 5-250A
|
| End Amp Range AC | 5-250A
|
| LCD SCREEN | No
|
| End Amp Range DC | 5-250A
|
| Pre-Flow Time | 0-10Seconds
|
| Post-Flow Time | 0-25Seconds
|
| USER INTERFACE | Analog Hybrid Style Knobs/Touch Buttons/Segmented LED Numeric Display
|
| Up-Slope Time | 0-10Seconds
|
| INVERTER TYPE | Digitally Controlled IGBT
|
| Down-Slope Time | 0-25Seconds
|
| Wireless Connectivity | No
|
| TIG Pulse | AC
DC
|
| Functions with Remote | No
|
| AC Pulse Type | Standard
|
| PowerSet Simplified Pro Setup | No
|
| DC TIG Pulse Wave Shape | Square
|
| Carbon Arc Capable | No
|
| DC Pulse Frequency | 0-500Hz
|
| Maximum Stick Rod Diameter (Recommended, may vary by mfgr. and type) | 5/32"
|
| AC Pulse Frequency | 0-500Hz
|
| E6010/Cellulose Rod (Electrode) Capable | No
Use 6011 for best results
|
| Pulse Time-On (Balance/ Duty Cycle) | 10-90%
|
| Pulse Amperage | 5-95% of Welding Amperage
|
| AC Frequency | 20-250Hz
|
| AC Balance | 10-90% of Positive Electrode
|
| IMPORTANT STICK SPECIFICATION NOTES | Not for E6010 use.
|
| AC Wave Forms | Square
|
| Remote Functions | 2T
4T
Pedal
|
| PowerSet (Simplifed Pro Set Up) | No
|
| Fan | On-Arc
|
| Cooler Control | Runs Continuously
|
Metal Type/Capability
Common Recommended Metal Types For TIG*:
Steel:
.007" to 1/2"
Stainless
.007" to 1/2"
Aluminum:
.008"- 3/8"
*Capability is based on skill, and general welding knowledge. The maximum limit is a practical recomended limit based the industry standard of performing thicker welds with multiple passes.
Recommended Range of Welding Rod Diameters**:
1/16"- 5/32"
**Range of welding rod diameters is based of welding rod type and manufacturer's actual recommendations. Always consult manufacturer's recommendations for Amp range and minimum/maximum welding capability of each rod type.
Recommended Applications
- Home/Hobby/DIY
- Prototyping
- Marine
- Fabrication and Production
- Motor Sports
- Farm/Ranch
- Pipe and Structural
What’s Included in The Package
- NOVA 18 Series Water-Cooled Rigid-Neck TIG Torch 12.5 Ft. 35 DINSE-Type Connector (No-Gas Thru)
- <250A Stick Electrode Holder (Stinger) with Cable and DINSE 35 Type Connector 10 Ft.
- NOVA™ Foot Pedal For Everlast TIG 7 PIN
- Everlast RH-191 Argon and Argon CO2 Flow Meter/Regulator with 5/8 CGA Fittings and Gas Hose
- PowerCool W401 (240V)
- NOVA HD PowerCart 375LF Welding Cart with Single Cylinder Capacity
- Consumable Starter Kit
- 6 Foot Power Cord (No Plug Included)
Warranty
