PowerTIG 200DV
Product Overview
SKU# PT-200DV
- Unit Weight: 56 lb
- Unit Dimensions: 9.5 in × 25 in × 14.63 in
The PowerTIG 200DV is perfect for beginners and professionals who want a simple to use TIG weder without compromising welding performance. While the PowerTIG 200DV is not the most advanced unit Everlast offers, it checks all the boxes for the essentials needed for welding most daily shop chores up to 1/4". It features both AC/ DC TIG Pulse TIG welding capability, it also features stick welding capability as well. As a 200A TIG welder, the unit offers AC Frequency and Balance control in AC mode. These two features are essential to getting the most performance out of your machine. If welding at the limitsThe unit offers a pulse function as well for TIG in both AC and DC modes. The auto-sensing dual voltage 120/240V input allows the user to take the unit to the jobsite where there may not be 240V available. For stick performance, the unit performs well with titania and iron powder fluxed rods.
Key Features:
- Dual Voltage 120V/240V
- High TIG Duty Cycle: 200A @60%
- Pulse TIG up to 150Hz
- AC Frequency and Balance Control
Generator Requirements and Important Product Notes
Generator Requirements:
- 5% or less Total Harmonic Distortion
- 8500 Surge Watts
Product Notes:
- Not for use with E6010 and most cellulosic rods
- E6011 use is permissible
General Use and Specifications
| Open Circuit Voltage (OCV) | 75V
75V
|
| Voltage/Phase | 120V 1 Phase
240V 1 Phase
|
| TIG Max Inrush Amps (I1Max) | 120V 1 Phase: 35 A
240V 1 Phase: 31 A
|
| TIG Rated Effective Amps (I1Eff) | 120V 1 Phase: 24 A
240V 1 Phase: 23 A
|
| TIG DUTY CYCLE 120V 1 Phase | 120V 1 Phase: 60% Duty Cycle @ 40°C at 125A/15V Rated Output
120V 1 Phase: 100% Duty Cycle @ 40°C at 100A/14V Rated Output
|
| TIG OUTPUT RANGE 120V 1 Phase | 120V 1 Phase TIG Amp AC Output Range: 20 to 125 Amps
120V 1 Phase TIG Volt AC Output Range: 10.4 to 15 Volts
120V 1 Phase TIG Amp DC Output Range: 5 to 125 Amps
120V 1 Phase TIG Volt DC Output Range: 10.2 to 15 Volts
|
| TIG DUTY CYCLE 240V 1 Phase | 240V 1 Phase: 60% Duty Cycle @ 40°C at 200A/18V Rated Output
240V 1 Phase: 100% Duty Cycle @ 40°C at 160A/16.4V Rated Output
|
| TIG OUTPUT RANGE 240V 1 Phase | 240V 1 Phase TIG Amp AC Output Range: 20 to 200 Amps
240V 1 Phase TIG Volt AC Output Range: 10.4 to 18 Volts
240V 1 Phase TIG Amp DC Output Range: 5 to 200 Amps
240V 1 Phase TIG Volt DC Output Range: 10.2 to 18 Volts
|
| Stick DUTY CYCLE 120V 1 Phase | 120V 1 Phase: 35% Duty Cycle @ 40°C at 100A/24V Rated Output
120V 1 Phase: 60% Duty Cycle @ 40°C at 80A/23.2V Rated Output
120V 1 Phase: 100% Duty Cycle @ 40°C at 60A/22.4V Rated Output
|
| Stick OUTPUT RANGE 120V 1 Phase | 120V 1 Phase Stick Amp DC Output Range: 5 to 100 Amps
120V 1 Phase Stick Volt DC Output Range: 20.2 to 24 Volts
|
| Stick DUTY CYCLE 240V 1 Phase | 240V 1 Phase: 35% Duty Cycle @ 40°C at 160A/26.4V Rated Output
240V 1 Phase: 60% Duty Cycle @ 40°C at 130A/25.2V Rated Output
240V 1 Phase: 100% Duty Cycle @ 40°C at 100A/24V Rated Output
|
| Stick OUTPUT RANGE 240V 1 Phase | 240V 1 Phase Stick Amp DC Output Range: 5 to 160 Amps
240V 1 Phase Stick Volt DC Output Range: 20.2 to 26.4 Volts
|
| TIG Start Type | Lift Start With Remote
HV/HF Solid State (Touchless) Start
|
| Hot Start | Fixed
|
| Start Amp Range AC | Fixed
20A
|
| Start Amp Range DC | Fixed
5A
|
| Arc Force | Adjustable
|
| End Amp Range AC | Fixed
20A
|
| Voltage Reduction (VRD) | No
|
| End Amp Range DC | Fixed
5A
|
| Anti-Stick Protection | No
|
| Output | DC
|
| Pre-Flow Time | 0-10Seconds
|
| Post-Flow Time | 0-25Seconds
|
| Adjustable AC Balance | No
|
| USER INTERFACE | Analog Hybrid Style Knobs/Touch Buttons/Segmented LED Numeric Display
|
| Up-Slope Time | Fixed
|
| Adjustable AC Frequency | No
|
| Wireless Connectivity | No
No
|
| INVERTER TYPE | Analog Controlled IGBT
|
| Stick Pulse | No
|
| Down-Slope Time | 0-25Seconds
|
| TIG Pulse | AC
|
| Functions with Remote | No
|
| AC Pulse Type | Standard
|
| PowerSet Simplified Pro Setup | No
|
| DC TIG Pulse Wave Shape | Square
|
| Fan | On-Arc
On-Arc
Fan Function is User Selectable
|
| Carbon Arc Capable | No
|
| DC Pulse Frequency | 150Hz
|
| Maximum Stick Rod Diameter (Recommended, may vary by mfgr. and type) | 5/32"
|
| AC Pulse Frequency | 0-150Hz
|
| E6010/Cellulose Rod (Electrode) Capable | No
Use 6011 for best results
|
| Pulse Time-On (Balance/ Duty Cycle) | 10-90%
|
| Pulse Amperage | 5-95% of Welding Amperage
|
| AC Frequency | 20-250Hz
|
| AC Balance | 20-80% of Positive Electrode
|
| AC Wave Forms | Square
|
| Remote Functions | 2T
4T
Pedal
|
| Memory | No
|
| PowerSet (Simplifed Pro Set Up) | No
|
| Cooler Control | Runs Continuously
|
Metal Type/Capability
Common Recommended Metal Types and capabilities For TIG*:
Steel:
.007" to 5/16"
Stainless
.007" to 5/16"
Aluminum:
.025"- 1/4"
*Capability varies based on skill, weldment size and general welding knowledge. The maximum limit is a practical recomended single pass limit based the industry standard of performing thicker welds with multiple passes.
Recommended Range of Welding Rod Diameters**:
1/16"- 5/32"
**Range of welding rod diameters is based of welding rod type and manufacturer's actual recommendations. Always consult manufacturer's recommendations for Amp range and minimum/maximum welding capability of each rod type.
Recommended Applications
- Home/Hobby/DIY
- Auto Body
- Prototyping
- Fabrication and Production
- Farm/Ranch
What’s Included in The Package
- NOVA™ Foot Pedal For Everlast TIG 7 PIN
- Everlast RH-191 Argon and Argon CO2 Flow Meter/Regulator with 5/8 CGA Fittings and Gas Hose
- <250A Stick Electrode Holder (Stinger) with Cable and DINSE 35 Type Connector 10 Ft.
- <300 A Work (Ground) Clamp with 10 Ft. Cable and DINSE 35 Connector
- Consumable Starter Kit
- 240V-120V Power Adapter
- 6 Ft. Power cable with NEMA 6-50P Plug
Warranty
