NOVA 17V Series Air-Cooled Gas-Valve TIG Torch 12.5 Ft. 25 DINSE-Type Connector (No Gas Thru) 17 Series
Product Overview
SKU# NVA-17V-125-UF-25QD
- Unit Weight: 4 lb
- Shipping Weight: 5 lb
- Unit Dimensions: 16 in × 16 in × 2 in
The NOVA 17V Rigid Neck Torch uses a gas valve to manually control gas flow. This fits the Cyclone 200ES with DC Lift TIG function as well as the PowerArc 140ST unit with lift start. It is rated for 150A DC use and 120A AC use for medium to light welding. This torch is also called a "TIG-Rig" in the industry and is often used for lift start DC only TIG units without a gas solenoid. The gas line attaches direct to the gas regulator. This torch uses the smaller DINSE 25 (3/8" diameter pin on the power connector). This torch interchanges consumables with most standard WP-Type torches which can be bought in local welding supply stores, or here on this site. NOTICE: This unit comes with a quick connect coupling for gas, so it will need an additional quick coupling adapter to adapt to a gas regulator.
General Use and Specifications
| AC Torch Amperage Rating | 120Amps
|
| AC Torch Duty Cycle @ Amperage Rating | 60%
|
| DC Torch Amperage Rating | 150Amps
|
| DC Duty Cycle @ Amperage Rating | 60%
|
| TORCH NECK TYPE | Straight/Rigid
Gas Valve
|
| TORCH SERVICE TYPE | Standard Service
|
| TORCH HANDLE TYPE | Standard
|
| TORCH REMOTE SWITCH INCLUDED | Yes
|
| TORCH CABLE TYPE | Standard (Rubber)
Ultra-Flex (Silicone)
|
| NUMBER OF MAIN CABLES | Single Line Air-Cooled
|
| CABLE LENGTH | 12.5Ft.
|
| CABLE POWER ADAPTER SIZE/TYPE | DINSE 25 Type (Solid)
|
| GAS CONNECTOR TYPE | Quick Connect (Type B, 9mm)
|
Brochures, Manual and Downloads
Brochures