PowerPro 164Si

IGBT Analog AC/DC

$1,199.00

$973.00

Save - $226.00

Product Overview

PowerPro 164Si

IGBT Analog AC/DC

SKU# PP-164SI

Unit Weight: 59 lb
Unit Dimensions: 25 in × 15 in × 9.5 in

The PowerPro 164Si is clearly a great choice for the person needing a modestly powered welding package that offers a little bit of everything. It is perfectly suited for the home garage, small fabrication facility or portable repair business. The all new digital IGBT inverter design features 120/240V input for true go anywhere performance. Digital control has improved operation and reliability over the previous PowerPro 164 models while increasing precision of adjustments. If you need true portability for on-the-site welding and cutting or occasional light fabrication chores, the PowerPro 164Si is well equipped to handle your needs, with TIG, Stick and Plasma cutting features. The TIG mode also features full adjustability of the AC output with AC frequency and AC balance controls to offer the maximum quality weld. When you add the simple 2 speed TIG pulse feature, this unit gives you plenty of capability. At the power level this unit puts out, it's able to weld up to 3/16" aluminum and 1/4" steel in a single pass in TIG mode, and handle many common 1/8" stick electrodes. The stick feature offers stick welding power up to 130 amps, enough power for general duty welding up to 1/8" electrodes when TIG welding just isn't possible, and where TIG isn't the best solution. The 40 amp plasma is good for regularly cutting metal up to 3/8" thick with severance capability up to 5/8" thick. This unit also features a generous 60% duty cycle in TIG mode at full power, so there's more welding being done than sitting around waiting for the unit to recover.

General Use and Specifications

IGBT Inverter Type:	IGBT
Voltage/phase:	DUAL VOLTAGE 120/240 1 PHASE
TIG output type:	AC/DC
TIG Start Type:	High Frequency Only
Pulse:	Y F
Plasma Cutter Arc Start Type:	Blow Back (Piston type)
PilotArc:	Yes
OK-to-Cut Indicator/Low Air pressure safety:	Yes
AC Frequency:	20-250 Hz
AC Balance (cleaning):	10-90%
OCV:	85V TIG/Stick, 290V Plasma
Max Inrush ( I1MAX ) Amps:	1 2
Maximum Rated (I1EFF ) Input Amps:	1 2
TIG Output Amps/Volts @ Rated Duty Cycle:	120V: 6 1 240V: 6 1
Stick Output Amps/Volts @ Rated Duty Cycle:	120V: 6 1 240V: 6 1
Plasma Output Amps/Volts @ Rated Duty Cycle:	120V: 3 6 240V: 3 6 1
TIG AC Amp/Volt Range:	1 2
TIG DC Amp/Volt Range:	1 2
Stick Amp/Volt Range:	1 2
Plasma Amp/Volt Range:	1 2
Start Amps:	Fixed, Minimum
End Amps:	Fixed, Minimum
Down Slope Time:	0-10 Seconds
Up Slope Time:	Fixed, Minimum
Preflow time:	Fixed, .5 Seconds
Post Flow Time:	0-10 Seconds
OverCurrent Protection:	Yes
Duty Cycle Protection:	Yes
Air Pressure OK Safety Indicator:	Yes
TIG Pulse Frequency:	1Hz or 25 Hz (Fixed 2 speed)
TIG Pulse Time On:	Fixed, 50%
TIG Pulse Amp Range:	Fixed, 50%
Stick Arc Force Control:	Auto
Torch Type:	S-45
Recommended Cutting Air Pressure:	75 PSI
Recommended Compressor Capacity:	4 CFM or greater, 20 gallon

Warranty

Brochures, Manual and Downloads