PowerTIG 400EXT (3Ph 480V)

If you need the most power the PowerTIG 400 EXT is the latest and most powerful member of Everlast's PowerTIG series of TIG/Stick welders. With 35% duty cycle at 400, there's  enough power to weld most every TIG welding chore found in most any shop and do it without stopping every minute or so to rest.  Compared to other competitors in it's class it's also more duty cycle in single phase than any other welder as well with a 35% duty cycle at the full 400A in TIG mode. The welder also has a generous 315A output @ 35% duty cycle in stick mode which means it has enough stick power to tackle almost any common stick fabrication or repair chore with up to 1/4" electrode.  For AC TIG applications, the Advanced AC pulse feature this unit is capable of delivering considerably more TIG welding capability (thickness) than any other unit in it's class. This unit is designed to get the job done where thicker plate and weldments are common.  As far as features go, the PowerTIG 400EXT doesn't fall short either.  It has all the familiar features you've come to expect in the EXT digital class of welders from Everlast. as far as basic layout and operation are concerned for those shops that want to upgrade to a heavier unit without retraining personnel.  Duty cycle is a favorable 35% at maximum output and is able to go the distance with its high output constant-on fan design.  As far as low end performance goes, this brute is far from clumsy.  It features a respectable 5A DC and 10A  AC low end operation capability.  Just add a power plug, gas and Tungsten, and you are ready to weld. This is the 3 phase 480V version.  It is designed for operation with only 3 phase 480V and cannot be converted to 1 or 3 phase 240V use. For the 240V version click here: https://www.everlastgenerators.com/product/tig-stick/powertig-400ext